One-piece Monoblock Implant
DSI One-piece Implant
This DSI state-of-art implant special feature is one-piece, titanium alloy construction, which provides maximum strength, while its small diameter
allows placement in areas of limited tooth-to-tooth spacing. The DSI One-piece has been shown to be stronger when loaded to failure than most industry standard under-4-mm diameter implants .
Those implants can be placed using a single-stage protocol, while soft-tissue experiences much less trauma than typical two-stage protocols.
Due to uniform structure, it also has a very high success rate when immediately loaded.
DSI One-piece is a small-diameter implant for the long-term treatment of missing maxillary laterals and mandibular incisors.
It allows treatment of narrow spaces that cannot be otherwise handled with larger two-piece implants
Integrated abutment has a gold anti-bacterial coating. while implant body receives same SLA surface treatment as other DSI implants
The method of surface treatment used for the implant is based on SLA technology:
Sandblasted, Large-grit, Acid-etched.
It allows to create the best rough surface topography required in implantology, having shown advantages over other roughened implant surfaces
The surface is sandblasted with large-grit (250–500 μm), which results in a peak-to-peak macro-roughness of approximately 20–40 μm,
followed by micro-roughness of approximately 2–4 μm upon acid etching.
Our company philosophy based on not using chemicals or industrial pollutants
which can bring a harmful long-term consequences, resulted by the chemicals break-up.
We use only natural components such as citric acid to provide maximum bio compatibility without compromising the process quality.
Micro-rough surfaces increase the rate of cell spreading and the number of cells attached to the surface, and increase the rate that cells produce factors regulating the differentiation of bone-forming cells (osteoblasts)
and reduce the activity of bone-destroying cells (osteoclasts).
This process is unique to our company and based on years of experience and
hundreds of thousands of implants manufactured and successfully implanted worldwide.
Name: DSI One-piece Implant
System: One piece with integrated straight abutment
Diameters: 3.0mm / 3.3mm
Lengths: 10mm / 11.5mm / 13mm / 16mm
Material: Titanium TI-6AL-4V ELI Grade 5 Alloy
Surface Treatment: SLA , Sterilization: Gamma Irradiation, Golden Coating, Sterile tube
Certification: ISO 9001:2008 Medical ISO 13458:2003 , CE
Country of Manufacture: Israel