DSI Conical Impression NP3.5mm Open Transfer FDA

DSI Conical Connection Long Transfer Nobel Active 22mm

For more versatility and simplicity an industry standard hexagonal abutment driver 1.25mm is used for insertion.

Compatible with Nobel Active and similar conical connection systems like DESS, Implant Direct, ADIN A.B etc.

DSI CC Transfer used in Implant-level direct for open-tray, pick-up impression technique with a conical connection.

DSI CC Transfer designed to transfer the soft tissue profile as well as the implant’s position and hex orientation, Direct Transfers are held firmly within the open-tray impression as it is removed from the mouth.

Therefore, the central transfer screw must be removed before the impression can be released from the mouth.

This transfer procedure requires a custom tray or modified stock tray with screw access holes in the areas occlusal to the implants.

The Implant Analog is connected to the transfer embedded within the impression, then the impression is poured in dental stone to fabricate a working cast containing a replica of the implant in the patient’s mouth.

DSI conical connection transfers are compatible with Nobel Active System and they presented in a narrow platform NP Ø3.5mm.

TITANIUM Titanium Grade 23 is a highly successful material for the fabrication of dental superstructures and implants, on account of its favorable combination of properties such as low specific weight, high strength to weight ratio, high modulus of elasticity, very high corrosion resistance and excellent general biocompatibility. Grade 23 formerly known as Ti-6AL-4V-ELI. ELI is short for "Extra Low Interstitials" that provide more ductility and better fracture toughness.

Advantages

• Low Specific Weight
• High Strength to weight ratio
• High Modulus of Elasticity
• High Corrosion Resistance
• Excellent General Biocompatibility